| MECHANICAL SPECIFICATIONS |
| |
|
| Az/El Drive |
Motorized Zero Backlash AvL Cable Drive (Patent Pending) |
| Polarization Drive System |
Motorized Worm Drive |
| Reflector Construction |
1.8m Single Piece AvL Carbon Fiber |
|
Axis Travel ▼ |
|
| Azimuth |
Standard: 400°; Optional dual waveguide through pedestal: 270° |
| Elevation |
|
| - Mechanical |
0-90° antenna boresight |
| - Electrical |
Standard limits at 5° to 65° (CE Approval) or 5° to 90° |
| Polarization |
±95° for 2-port and 3-port Ku-Band Feeds; ±50° (100º Effective) for Dual Ku-Band, 4-port |
| |
|
|
Az/El Speed ▼ |
|
| Slewing/Deploying (typical) |
2°/second |
| Peaking (typical) |
0.1°/second |
| |
|
| Motors |
24 VDC Variable Speed, Constant Torque |
| |
|
|
RF Interface ▼ |
|
| BUC Mounting |
Feed boom (100 lbs.; Max BUC envelope: 30 L x 22 W x 9 H inches (76 L x 56 W x 23 H cm)) orinside truck |
| Axis Transition |
Twist-flex or optional rotary joints for Ku-Band; Pol rotary joint standard for C-Band |
| Waveguide |
WR75 Cover Flange at Interface Point |
| Coax |
RG59 run from feed to base plus 25 ft. (8m) |
| |
|
| Electrical Interface |
25 ft. (8 m) Cable with Connectors for Controller |
| Manual/Emergency Drive |
Handcrank on Az, El and Pol axes, leads from 12VDC Pol Motor |
| Weight |
295 lbs. (134 kg) |
| Stowed Dimensions |
100 L x 71.4 W x 18.2 H inches (254 L x 181 W x 46.2 H cm); H with opt. controller: 19.3 in (49cm) |
| Time to Acquisition |
Less than 15 minutes, 8 minutes typical |
| Mounting |
Optional pallet for vehicle roof mounting |
|
| |
| ENVIRONMENTAL SPECIFICATIONS |
| |
|
| Wind - Survival |
Deployed: 80 mph (128 kph); Stowed: 125 mph (201 kph) |
| Wind - Operational |
30 mph (48 kph), Gusts to 45 mph (72 kph) |
|
Pointing Loss in Wind (Ku RX): ▼ |
|
| 20 mph (32 kph) |
0.1 dB typical |
| 30 mph gusting to 45 mph |
0.5 dB typical |
|
|
| (48 kph gusting to 72 kph) |
|
|
Temperature: ▼ |
|
| Operational |
-22° to 125° F (-30° to 52° C) |
| Survival |
-40° to 140° F (-40° to 60° C) |
|
| |
| RF / ELECTRICAL SPECIFICATIONS |
Receive |
Transmit |
| |
|
|
|
Feed Type ► |
Ka-Band |
| Frequency Range (GHz) |
17.7 - 20.2
|
27.5 - 30.0 |
| Polarization Configuration |
CP or LP |
| |
|
|
|
Gain (mid-band) ▼ |
|
|
| 2-Port Feed |
50.0 dBi |
53.0 dBi |
| |
|
|
|
Beamwidth ▼ |
|
|
| -3dB (Degrees) |
0.6 |
0.4 |
| -10 dB (Degrees) |
1.0 |
0.7 |
| |
|
|
| Radiation Pattern Compliance |
FCC §25.209, MIL-STD-188-164A |
| First Sidelobe Level (typical) (dB) |
|
|
| Antenna Noise Temperature (midband) |
108° K @ 20° El |
|
| G/T, midband, clear horizon |
26.8 dB/˚K w/ 100°K LNB |
|
| Axial Ratio (CP only, within pointing cone) (dB) |
1.5 |
1.0 |
| |
|
|
|
Cross-Polarization Isolation (dB) ▼ |
|
|
| On-Axis |
35 |
35 |
| Off-Axis (within pointing cone) |
30 |
30 |
| |
|
|
| VSWR |
|
|
| Power Handling Capability |
|
250 watts per Port |
| Feed Port Isolation - Tx to Rx (dB) |
80 dB |
80 dB (incl. opt. filter) |
|
| |
| CONTROLLER SPECIFICATIONS |
| |
|
|
Controller Type ► |
Three-axis Jog Control & Display with Auto-Stow |
| Optional Upgrades |
|
| Semi-automatic Operation |
Drive to calculated position based on operator entered vehicle location, heading, plus satellite (longitude or listed) |
| Automatic Operation |
Drive to calculated position based on auto GPS and Flux-Gate Compass data & satellite peaking w/ LNB signal |
| Auto-acquisition |
One-button acquisition of selected satellite including peaking and optimization of cross-pol (certified for auto- commissioning on most satellite services) |
| Size |
Two Rack Units for Semi-automatic & Automatic Controllers |
| Input Power |
110/240 VAC, 1 phase, 50/60 Hz, 10/5 A peak, 1 A continuous |
|
| |
| CONTROLLER SPECIFICATIONS: OPTIONAL |
| |
|
|
Optional Controller ► |
AvL AAQ |
| Features |
AvL one button auto-acquisition of selected satellites, including peaking and optimization of cross pol. Internal movement detector and automatic stow. Includes a hand-held control and separate power supply. Certified for auto- commissioning on most satellite services. |
| Size |
Embedded ACU with separate1 RU power supply |
| Input Power |
100 - 240 VAC 50/60 Hz 4 A peak, 300 W power supply |
|
| |
| Available Options, Upgrades & Services |
| |
• Upgrade Feed to 3- or 4-Port Ku-Band, 2-Port C-Band, 4-Port Ka-Band, or 2-Port X-Band
• Optional H/V switch (Ku Wideband)
• Optional Rotary Joint on Pol Axis with opt. Flex W/G to BUC
• Mounting Pallet (adds 4.5” (11.4 cm) to stow height)
• Add BUC/HPA Mounting (NOTE: minimum elevation may be restricted by these options)
• Upgrade to Custom RF/IF I/O cabling configurations available
• Custom Colorization (contact factory for available colors)
• Add Custom Logo on Reflector Face (1- or 2-Color; per AvL Logo Policy)
• Spare Parts Kit |
|
| |
| Technical Specifications Diagram |
| Inquire |
|
| |
| Compliance Standard |
| Inquire |
|
