AGILIS ACA de la Série en Bande C VSAT en plein air à Faible Bruit de Bloc de N de Sortie (LNB) | IK Tech Сorporation FR

AvL 1215 1,2 m, Manuel ou Motorisé, envolez-vous SNG Compact, Portable, Antenne en Bande Ku

AvL 1215 1,2 m, Manuel ou Motorisé, envolez-vous SNG Compact, Portable, Antenne en Bande Ku

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)


• Rx/Tx Feed: 2-Port Precision Ku-Band (LP) 
- Receive: 10.95 - 12.75 GHz
- Transmit:
13.75 - 14.50 GHz
• Opt. Rx/Tx Feed:
2-Port Mode-Matched Ku-Band (CP)
• Ultra Lightweight Portable Antenna
• Key Features
- 2 Ballistic Nylon Cases, <50lb ea.
- Optional Motorization
- Assembles in <5 Minutes
- Interchangable Feed for Tri-Band Capability

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)

 
Summary
AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.) AvL’s 1.2m Manual FlyAway Antenna System weighs 62 lbs assembled with a Ku-band feed, and is compact enough to fit into two ballistic nylon cases. The robust carbon fiber reflector and tripod base are rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored to increase wind resistance, and the antenna assembles in 5 minutes. 

AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions.  AvL 1215 Ku-Band Manual or Motorized FlyAway SNG/Military Antenna feature:
• 1.2m, 4 piece Carbon Fiber Reflector
• Lightweight, compact and portable in two small cases
• Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable
• Assembles in less than 5 minutes
• Feed rotation for polarization
• Easy pointing and fine-tuning Az/El positioner
• Manual actuators enable full range of motion
• Tripod legs can be anchored to increase wind resistance
• Single- or multi-band options for worldwide operation
• Prime focus offset optics with global mode-matched feed
• Manual actuators enable full range of motion
• Quick set-up operational in minutes
• Interface with all types of RF electronics and services
• Numerous packaging options including backpacks and rugged cases  
     
Technical Specifications Diagram    
Inquire

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS
   
Reflector Construction 1.2m segmented 4 piece Carbon Fiber
Axis Travel: ▼
Azimuth Coarse: 360 degree continuous / Fine: ±10°
Elevation Coarse: 5-90° / Fine: 5-90°
Polarization ±95°
   
RF Interface:
BUC Mounting Feed Boom (10 lbs max), or Remote
Coax Two connectors at Amplifiers
   
Electrical Interface Connectors at Amplifiers
   
Stowed Configuration & Weights:  
Reflector 36” x 25” x 5”, weighs 18 lbs
El Positioner 25” x 16” x 9”, weighs 13.7 lbs.
Az Positioner/Base 8.5” x 8.5” x 8”, weighs 14.3 lbs
Legs (3x) 9” x 5” x 20” (each), weights 2.7 lbs
Ku Feed/Feed Boom/Struts 34” x 4” x 8”, weighs 8lbs
Case Integration Antenna fits into 2 ballistic nylon case, less than 50lb per case
   
Total Weight 62 lbs. (with KU Precision Feed)
   
Note: BUC and LNB are CFE  
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind - Survival 80 mph instowed position
Wind - Operational: ▼
Without anchoring 20 mph
With anchoring 30 mph (48 kph), Gusts to 45 mph (72 kph)
   
Pointing Loss in Wind (Ku RX): ▼
Non-motorized 0.9 dB typical / 1.3 dB max
 
Temperature:
Operational -40°F to 140°F (-40°C to 60°C)
Survival -50°F to 180°F (-46°C to 82°C)
ENVIRONMENTAL SPECIFICATIONS
   
Wind - Survival Deployed: 60 mph (97 kph) (ballasted); Stowed: 90 mph (145 kph)
Wind - Operational 30 mph (48 kph), Gusts to 45 mph (72 kph)
Pointing Loss in Wind (Ka RX):
With optional controls and/or motors 1.4 dB typical / 2.0 dB max
 
Temperature:
Operational -22°F to 125°F (-30°C to 52°C)
Survival -40°F to 140°F (-40°C to 60°C)

 

 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Std. 2-Port Precision Ku-Band
Frequency Range (GHz) 10.95 - 12.75 13.75 - 14.50
Polarization Configuration Linear Orthogonal Standard, Optional Co-Pol
     
Gain (mid-band) 40.0 dBi 41.5 dBi
-3dB Beamwidth (mid-band) 1.8˚ 1.5˚
Radiation Pattern Compliance FCC §25.209, ITU-R S.580.6
Maximum Feed Transmit (Tx) Power
500
Antenna Noise Temperature (midband) 54˚ K
G/T, midband, clear horizon 19.6 dB/˚ K (50˚ LNB)
     
Cross-Polarization Isolation (dB)

On-Axis 35 35
Off-Axis (within pointing cone) std. Precision feed 26 27
Off-Axis (within pointing cone) opt. MM feed 25 35
     
VSWR 1.30:1 1.30:1
Feed Port Isolation - Tx to Rx (dB) 35 dB 80 dB (incl. filter)
 
CONTROLLER SPECIFICATIONS
   
Controller Type Optional AvL AAQ – Motorized or Computer-Assisted Pointing (CAP)

Enhanced Auto-Acquire with Std. Ethernet IP Interface
Integration Embedded w/ Ethernet IP interface (P/S optional) (optional rack- or shelf-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; 250W
Software Upgrades/Options
(Motorized)
Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
• Upgrade from 2-Port Precision Ku Feed to: a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku; b) 2-Port X MIL; c) 2-Port Ka MIL; d) 2-Port Ka Comm.
• Add co-polarization Kit (for 2-port Ku feeds only) - configures Rx and Tx to same polarization sense ) (may require second case) 
• Add BUC/HPA mounting (NOTE: minimum elevation may be restricted by these options) ) (may require second case)
• Upgrade to custom RF/IF I/O cabling configurations available
• Custom colorization (contact factory for available colors)
• Add custom logo on reflector face (1- or 2-Color; per AvL Logo Policy)
• Upgrade from standard manual pointing to AvL AAQ Enhanced Auto-Acquire (see Controller section, above, for some of these options) (may require second case)
• Add power supply for AAQ Controller upgrade (requires second case)
• Spare parts kit * Outside main beam
** Contact Sales for commercial Ka-band frequency range options and circular or linear polarization options.
*** Excluding optional filters
 
Technical Specifications Diagram
Inquire
 
Compliance Standard
Inquire